Highly Compact, Fully functional Development Board for complete systems control.
Vega is our mid range, 4.5 x 3.5 inch footprint systems control board with the following features.
BULLET FEATURES
- Up to 32vdc electronic system tolerance
- Float point math unit, 32 bits only
- 1024 Flash, 256K RAM, 4K EEPROM
- USB device 12 Mbit/sec, USB host 480 Mbit/sec
- 64 digital input/output pins with x16 5V tolerant, 22 PWM output pins with x4 1 ampere drivers, x4 19 ampere drivers, hal sensor, and regulated 5V PWM output
- 25 analog input pins, 2 analog output pins, 11 capacitive sense pins
- 6 serial, 3 SPI, 4 I2C ports
- 1 I2S/TDM digital audio port
- 2 CAN bus
- 1 SDIO (4 bit) native SD Card port
- 32 general purpose DMA channels
- Cryptographic Acceleration & Random Number Generator
- RTC for date/time
PROCESSOR 1
Performance
- Up to 180 MHz ARM Cortex with DSP instructions and Single Precision Floating Point unit
System and Clocks
- Multiple low-power modes to provide power optimization based on application requirements
- Memory protection unit with multi-master protection
- 3 to 32 MHz main crystal oscillator
- 32 kHz low power crystal oscillator
- 48 MHz internal reference
Security
- Hardware random-number generator
- Supports DES, AES, SHA accelerator
- flash security
Timers
- Four Periodic interrupt timers
- 16-bit low-power timer
- Two 16-bit low-power timer PWM modules
- Two 8-channel motor control/general purpose/PWM timers
- Two 2-ch quad decoder/general purpose timers
- RTC
Human-machine interface
- Low-power hardware touch sensor interface with GPIO
Memories and memory expansion
- Up to 2 MB program flash memory on nonFlexMemory devices with 256 KB RAM
- Up to 1 MB program flash memory and 256 KB of
- FlexBus external bus interface and SDRAM controller
Analog modules
- Two 16-bit SAR ADCs and two 12-bit DAC
- Four analog comparators containing a 6-bit
DAC and programmable input
- Voltage reference 1.2V and 12V
Communication interfaces
- Ethernet controller with hardware IEEE 1588 capability
- USB high speed transceiver
- USB full-/low-speed OTG with on-chip transceiver
- Low Power Universal Asynchronous Receiver Transmitter 0 and five standard UARTs
- Secure Digital Host Controller
PROCESSOR 2
Performance
- 48 MHz ARM Cortex
Memories and memory interfaces
- Up to 32 KB program flash memory
- Up to 4 KB SRAM
System peripherals
- Nine low-power modes to provide power optimization based on application requirements
- Software watchdog
- 4-channel DMA controller, supporting up to 63 request sources
- wakeup unit
- SWD debug interface and Micro Trace Buffer
- Bit Manipulation Engine
Clocks
- 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator
- Multi-purpose clock source
- 1 kHz LPO clock
Human-machine interface
- 41 general-purpose input/output (GPIO)
Communication interfaces
- 8-bit SPI module
- low power UART module
- I2C module
Analog Modules
- 12-bit SAR ADC
- Analog comparator containing a 6-bit DAC w/ reference input
Timers
- Six channel Timer/PWM
- One 2-channel Timer/PWM module
- Periodic interrupt timers
- 16-bit low-power timer
- Real time clock
Security and integrity modules
- 80-bit unique identification number per chip
BOARD DESIGN
- HIGH EMI/EMC Tolerance layout
- FR4 190 degree, mil spec
- 4oz Layer traces
